Products
Description
● 30% Brighter LCD Screen
Compared to previous model (DG-3), DG-3x has TFT liquid crystal whose brightness has increased by 30%. The view angle has expanded and the visibility rate has improved.
You can improve accuracy of analysis by using high resolution image taken with 2.3 MP CCD which can meet a wide variety of needs from observation at the site to research and development.
● Scales, grids and magnification indicators on a screen
Scale and magnification are shown at lower right of the monitor. You can clarify magnification of the object at the time of shooting by making it a yardstick of the size of the object at the time of viewing or by recording the object while indicating scale magnification ratio.
By using the 7 additional scales (with Grid Editor software), you can confirm quality acceptance/rejection criteria and size of the problematical part which are difficult in judgment at the site, the finish of the product and so on.
● Versatile function
- Light and easy to carry
- Touch and View
- Data can be put into a CF card.
- Output to an outside monitor
- Easy to focus
Specifications
| Image capture element | 1/1.75 inch interlace scanning CCD (Aspect ratio 3:2 RGB original color filter square pixel) |
| Pixels | Total pixels approx. 2.3 MP(1901 (h)×1212(v)) Effective pixels approx. 2.16MP(1816 (h)×1208(v)) |
| Mount | Scalar DG mount (C-mount compatible with C-mount adapter attached) |
| Shutter speed | 1/45-4 sec |
| Storage | CF memory card ●NORM mode：1792×1184 pixels, approx. 500KB ●FINE mode：1792×1184 pixels, approx. 900KB ●ZOOM mode： 896x 592 pixels, approx. 500KB |
| CF memory card number of recordable images | ●NORM mode：approx. 638 images with 256MB ●FINE mode：approx. 283 images with 256MB ●ZOOM mode：approx. 638 images with 256MB ※Number of images will depend on type of images captured. |
| Monitor | 3.5-inch 230,000 pixel TFT LCD(960×240 dots) |
| Video output | NTSC |
| VIDEO OUT terminal | 3.5mm monaural mini-jack(LCD monitor side) |
| REMOTE terminal | 2.5mm stereo mini-jack(doubles as external flash cynch) |
| DC IN terminal | EIAJ standard type-2 DC jack(center plus) |
| Light switch | Light A, light B interchangeable for lenses with built-in light sources) |
| Output | voltage 5V, maximum output current 250mA |
| Input | voltage DC6.0V±5% 1A; battery operation:6.0V-7.2V±5% |
| Power consumption | approx. 6w (microscope only) |
| External dimensions | 98×201.5×68mm |
| Battery running time | Consecutive monitor use: 1 to 1.5 hrs (depends on use settings) Consecutive recording: 1hr(depends on use settings) |
| LED for power check | Power on…green LED on Low battery …red LED on Power off… both LEDs off |
| Weight | approx.370g(microscope only)approx. 490g(with battery and CF card) |
| Installation screw | Camera screw |
| Operating environment | 0 to 40℃ |
| Storage environment | -10-55℃ |
| Operating and storage humidity | 30-85%(no condensation) |
Reviews
There are no reviews yet.